info@skofindia.com | +91 7069024820
info@skofindia.com | +91 7069024820
FINAL TOUCH, MAXIMUM IMPACT
Ready to Use Chemical Mould Release Agent
CLEAFORM MR is a specially formulated blend of mineral oils and chemicals having release properties, which are superior to those of conventional mould oil. The chemicals react with the alkali in the concrete to form a thin waterrepellent skin on the surface of the mould; thereby enabling easy stripping from concrete and protect steel and wooden formwork. CLEAFORM MR is supplied as a pale straw coloured, ready to use liquid. It reacts with the alkalis and water at the interface of the concrete and form work to produce a thin film of lime soap, which breaks the bond enabling the formwork to be readily stripped. Excellent “off form” finish produces a clear reproduction of formwork texture and sharp concrete feature.
PREPARATION OF NEW MOULDS
No preparation is necessary but if extensive reuse of Timber moulds is envisaged, it is advisable to protect all new surfaces with CLEAFORM MR. For used moulds, all traces cement must be removed together with any surface deposits of previous oils
COATING:
CLEAFORM MR can be applied by brush, sponge or conventional mould oil-sprayer. If an oil-sprayer is used, care should be taken to choose correct size of sprayer. Apply one, thin and even coat of CLEAFORM MR over the entire surface. Only the thinnest coating necessary to achieve effective coverage should be applied. Excess application is uneconomical and may lead to surface dusting. Wire or brush off any excess particles on the surface and apply one coat of CLEAFORM MR as before. To remove CLEAFORM MR completely, for recoating mould or shutter surface, use strong industrial detergent together with stiff brushing & then thoroughly rinse with clean water.
Available in 1kg Can, 5kg Can, 200kg HDPE (7.8kg)
