JULIN P/G (STRUCTURE)

ADHESIVES & SEALANTS

BOND BEYOND LIMITS

JULIN P/G (STRUCTURE)

Two-Part Polysulphide Sealant – Gun Grade for Expansion and Construction Joints

JULIN P/G (Structure) is a high-performance, two-component polysulphide sealant in gun-grade (non-sag) consistency, designed for vertical and inclined expansion and construction joints in buildings, infrastructure, and structural concrete works. It cures to form a tough, flexible, and water-resistant seal.

SPECIFICATIONS
DIRECTIONS FOR USES
ADVATAGES
PACKING

IS 12118-1(1987)

Prepare the joint, prime both sides with JULIN PRIMER. Insert backer rod and masking tape. Mix base and curing agent thoroughly to a uniform grey paste. Load into a cartridge and apply using a caulking gun. Tool the joint for a smooth finish. Remove masking tape immediately after tooling.

Excellent adhesion to varied construction materials
Accommodates cyclic movements
Non-sag for vertical and overhead use
Resistant to UV, fuels, dilute acids, and alkalis
Long-lasting elastic sealant with low shrinkage

Available in 1 kg Pouch and 4 kg bucket

ADHESIVES & SEALANTS

JULIN P/G (STRUCTURE)

Our Other Products

Related products

SKOFBOND SBR H4

BLOCKFIX NF

JULIN PRIMER

SKOFBOND SAC M50